![]() ![]() ![]() ![]() There are also isolators with other kinds of receivers, for example photoresistors (which are largely outdated) or p–i–n photodiodes, or with Darlington phototransistors for a particularly high current transfer your ratio (see below). Those are mounted in a distance of a few millimeters, for example, within an opaque package. Typically, one uses an infrared light-emitting diode (LED, usually GaAs-based) and a silicon phototransistor. Of course, one chooses an emitter which well matches the spectral response of the receiver. The operation principle of an opto-isolator is to convert an electrical signal to an optical signal, transmit that light signal and to convert it back into an electrical signal. Similar functions are often obtained with transformers, which however cannot transmit DC signals and are typically substantially larger and more heavy than opto-isolators.Įven though the term optical isolators is sometimes used, such devices must not be confused with optical isolators like Faraday isolators, which allow light transmission in one direction only. of dual in-line type, as otherwise also used for small electronic components such as operational amplifiers. An opto-isolator is normally provided in a compact package, e.g. Opto-isolators, also called optocouplers or photocouplers, are optoelectronic components which can be used to transmit analog or digital electrical signals between two electrical circuits while providing electrical isolation. Copy to Clipboard Download file Figure 1: A common opto-isolator contains an LED and a bipolar phototransistor. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |